Closed shutters are the next best barrier against the variable temperature and wind in New Brunswick, coming right after windows. Other window treatments such as blinds, draperies, and shades block most of the external temperature, not all. And, where a sturdy window treatment means the difference between a comfortable spot by the window and one that’s not, Polywood® shutters are the preferred product.
Polywood shutters are built from a synthetic polymer that insulates up to 70% better than an equivalent traditional wood shutter. In fact, the Polywood Shutter Insulating System blocks as much as 30 degrees of airflow and diminishes heat transfer by 45.96%. This results in energy savings for your house – and complete control over room temperature.
Your home’s heating and cooling system takes less time to work now that you have insulated against most of the impact from the weather outside. If you want to let in some of the light and be more exposed to the outside temperature, simply slant the louvers open and adjust them to a preferred position. You can get more window treatment temperature control. Simply follow the instructions below to close your shutters all the way.
How to Close Your Shutters for Complete Temperature Control
There are two parts of your shutters that ought to be closed to seal off external temperature: the panels and the louvers.
To close your Polywood shutter panels properly, swing them toward the window. As you move the panels into the shutter frame, check that the pieces of weatherstripping interlock along the vertical ends of your shutters.
To properly close your louvers, push the tilt rod toward the louvers and check that the top of the tilt rod fits into the “mouse hole” just above the top louver. Do this by running your hand up the tilt rod, pushing in as you go. This is also true for taller shutters. Sometimes a soft push at the bottom of the tilt rod isn't enough and can leave gaps at the top.